STRUCTURE CHARACTERIZATION AND NEW INSIGHTS INTO PHASE STABILITY OF Ti6Al4V FILMS MAGNETRON SPUTTER GROWN ONTO A STAINLESS STEEL
Abstract
Ti6Al4V films were grown onto an UNS S31600 austenitic stainless steel by rf magnetron sputtering. Sample surfaces were analyzed by X-ray diffraction, aiming to characterize film structure, and by energy dispersive spectroscopy, for chemical composition determination. Deposition experiments varying both chamber pressure and plasma power were carried out. The effect of those variations in pressure and power on type of phases formed and their crystal size was appraised. Ti-BCC films with sharp texture and nanometric sized crystals were obtained. Film preferred crystallographic orientation and chemical composition were almost unaffected by variations on both pressure and power. On the other hand, crystal size was highly dependent on deposition parameters. Scherrer's analysis allowed estimating average crystal sizes which ranged between 10 and 30 nm approximately. Lower plasma powers or higher chamber pressures led to smaller film crystals. The role of physical parameters controlling stability of crystal phases and their crystal size is discussed.Downloads
Downloads
Published
How to Cite
Issue
Section
License
The authors of papers accepted for publication by the RLMM, should recognize the complete transfer of copyright (in all languages) to the RLMM. This transfer includes the right by the RLMM to adapt the article for digital or printed reproduction without altering the written content and information displayed in tables or figures within. The authors retain the copyright and guarantee the journal the right to be the first publication of the work as well as licensed under a Creative Commons Attribution License 4.0 Internacional (CC BY 4.0) which allows others to share the work with an acknowledgment of the authorship of the work and the initial publication in this journal.

