EFECTO DE LAS VARIABLES DEL PROCESO DE INYECCIÓN SOBRE LA ADHESIÓN POLIMERO-TELA USANDO LA TECNICA DE DECORACION EN MOLDE

Authors

  • Everling Dávila
  • María V. Candal
  • Miguel Sánchez-Soto

Abstract

The  effect  of  the  injection  process  conditions  over  the  adhesion  resistance  between  fabric  and  a  polymer  using  the  in mould decoration technique  was the objective of this research. Textile fibers and LDPE  were used forming an adhesive bonding. The effect of process conditions over the adhesion resistance was studied using a experimental design technique and  the  mechanical  properties  by  peeling  technique  was  evaluated.  It  was  found  that  the  injection  temperature  has  the higher influence over the adhesion resistance, when the variable is increases thereof, the adhesive resistance decreases.

Downloads

Download data is not yet available.

Downloads

Published

2014-04-26

How to Cite

Dávila, E., Candal, M. V., & Sánchez-Soto, M. (2014). EFECTO DE LAS VARIABLES DEL PROCESO DE INYECCIÓN SOBRE LA ADHESIÓN POLIMERO-TELA USANDO LA TECNICA DE DECORACION EN MOLDE. LatinAmerican Journal of Metallurgy and Materials, (1), 13–14. Retrieved from https://www.rlmm.org/index.php/rlmm/article/view/584

Issue

2014, S6

Section

Supplementary Articles

License

The authors of papers accepted for publication by the RLMM, should recognize the complete transfer of copyright (in all languages) to the RLMM. This transfer includes the right by the RLMM to adapt the article for digital or printed reproduction without altering the written content and information displayed in tables or figures within. The authors retain the copyright and guarantee the journal the right to be the first publication of the work as well as licensed under a Creative Commons Attribution License 4.0 Internacional (CC BY 4.0) which allows others to share the work with an acknowledgment of the authorship of the work and the initial publication in this journal.