MICROCELLULAR FOAM INJECTION MOLDING
DOI:
https://doi.org/10.5281/zenodo.10030488Abstract
The main objective of this work was the material and weight reduction of injection ABS parts made by the Mucell® microcellular injection molding process. It was found that the decrease of volume of molten polymer and the increase of the gas charge of the supercritical fluid, the weight reduction percentage of the parts was increased. It was achieved to manufacture parts by Mucell® with a maximum of 30% weight reduction related with injection plastic part.Downloads
Download data is not yet available.
Downloads
Published
2017-08-16
How to Cite
López, J., Arencón, D., Realinho, V., & Candal, M. V. (2017). MICROCELLULAR FOAM INJECTION MOLDING. LatinAmerican Journal of Metallurgy and Materials, 45–48. https://doi.org/10.5281/zenodo.10030488
Issue
Section
Supplementary Articles
License
The authors of papers accepted for publication by the RLMM, should recognize the complete transfer of copyright (in all languages) to the RLMM. This transfer includes the right by the RLMM to adapt the article for digital or printed reproduction without altering the written content and information displayed in tables or figures within. The authors retain the copyright and guarantee the journal the right to be the first publication of the work as well as licensed under a Creative Commons Attribution License 4.0 Internacional (CC BY 4.0) which allows others to share the work with an acknowledgment of the authorship of the work and the initial publication in this journal.
