EFFECT OF TIME AND TYPE OF ELECTROLYTE IN THE GENERATION OF OXIDE FILMS ON THE ALUMINUM ALLOY AA5083 - H116
DOI:
https://doi.org/10.5281/zenodo.7693734Abstract
The aim of the article is to evaluate the influence of the parameters of time and type of electrolyte on the thickness and hardness of the film generated by anodic oxidation on the aluminum alloy AA5083-H116. Electrolytes were evaluated, oxalic and phosphoric type with times of 30 and 45 min of anodizing. The morphology of the films was observed by scanning electron microscopy (SEM). The hardness of the surfaces was evaluated by means of Vickers tests. To validate the results, a factorial design was applied 22. The results showed that the oxalic type electrolyte has the highest values of thickness and hardness.Downloads
Downloads
Published
How to Cite
Issue
Section
License
The authors of papers accepted for publication by the RLMM, should recognize the complete transfer of copyright (in all languages) to the RLMM. This transfer includes the right by the RLMM to adapt the article for digital or printed reproduction without altering the written content and information displayed in tables or figures within. The authors retain the copyright and guarantee the journal the right to be the first publication of the work as well as licensed under a Creative Commons Attribution License 4.0 Internacional (CC BY 4.0) which allows others to share the work with an acknowledgment of the authorship of the work and the initial publication in this journal.


