2015, 35(1)

Cover

Portada

RLMM - Editorial
- PDF (Español (España))

Editorial Information

Información Editorial

RLMM - Editorial
- PDF (Español (España))

Table of Content

Tabla de Contenidos

RLMM - Editorial
- PDF (Español (España))

Editor's Letter

Editorial

RLMM - Editorial

1-2
- PDF (Español (España))

Regular Articles

CHALLENGES TO THE IMPLEMENTATION OF HIGH TEMPERATURE AND STRAIN INSTRUMENTATION FOR IN SITU TESTING IN THE SCANNING ELECTRON MICROSCOPE

Edwar A. Torres, Fabiano Montoro, Jimy Unfried Silgado, Antonio J. Ramirez

3-14
- PDF (Español (España))
BIOLOGICAL AND MECHANICS CHARACTERIZATION OF MICROMETRIC AND NANOMETRIC α-ALUMINA LIKE POTENTIAL MATERIAL FOR BONE TISSUE RECONSTRUCTION

Paola A. Villegas, Valentina Ramírez, Viviana M. Taylor, Sandra Arango

15-26
- PDF (Español (España))
MODIFICATION OF MULTI-WALL CARBON NANOTUBES (MWNTC'S) USING ACETIC ACID AND ANILINE BY ULTRASONIC RADIATION

Christian J. Cabello Alvarado, Aidé Sáenz Galindo, Catalina Pérez Berumen, Lluvia López López, Leticia Barajas Bermúdez, Liliana Cantú Sifuentes, Carlos Ávila Orta

27-33
- PDF (Español (España))
CRYSTAL STRUCTURE OF THE TERNARY SEMICONDUCTOR Cu2GeSe4

Gerzon E. Delgado, Jines E. Contreras, Gustavo Marcano, Carlos Rincón, Luis Nieves

34-38
- PDF (Español (España))
TOWARDS SPIDER SILK MIMICRY USING POLYURETHANES WITH SHORT SEGMENTS OF RIGID AND SEMIFLEXIBLE UNITS

Borja Fernández-d’Arlas Bidegain, Iker González, Arantxa Eceiza Mendiguren

39-48
- PDF (Español (España))
EFFECT OF HEAT TREATMENT ON THE STRUCTURAL AND MAGNETIC PROPERTIES OF THE SYSTEM Fe56.25Al43.75 PREPARED BY MECHANICAL ALLOYING

Juan Sebastian Trujillo Hernandez, Jesus Anselmo Tabares, German Antonio Pérez Alcázar

49-54
- PDF
RESIDUAL STRESSES GENERATED DURING HARDENING OF MEDIUM CARBON STEEL BAR, FINITE ELEMENT SIMULATION AND EXPERIMENTAL VERIFICATION

Edwan A. Ariza, Marcelo de Aquino Martorano, André Paulo Tschiptschin

55-64
- PDF (Español (España))
STUDY OF VENEZUELAN GARNIERITES MODIFIED WITH AMMONIUM HYDROXIDE AS SUPPORT OF HYDRODESULFURIZATION CATALYSTS

Carlos Felipe Linares, Gabriela Acuña, Freyder Pérez, Freddy Ocanto, Carolina Corao, Susana Martinez, Paulino Betancourt, Joaquin Brito

65-69
- PDF (Español (España))
ELECTRICAL CHARACTERIZATION AND ELECTROGENIC CELL STIMULATION USING A CONDUCTIVE POLYMER COMPOSITE BASED ON PEDOT:PSS/PVA/EG

Jose J. Suárez-Vargas, Marbely Calderon, Werner Brämer-Escamilla, Sarah Briceño, Ivan Sanchez, Pura Bolaño, Carlo Caputo

70-77
- PDF
PREPARATION OF NANOCOMPOSITES METAL-POLYMER: Fe/PCL

Joszaira Lárez, Carlos Rojas, Luis Cortina, Maria Cristina Hernandez

78-85
- PDF (Español (España))
OBTAINING SELF-COMPACTING CONCRETE USING DEMOLITION WASTE

Yimmy Fernando Silva Urrego, Rafael Andres Robayo Salazar, Pedro Enrique Mattey Centeno, Silvio Delvasto Arjona

86-94
- PDF (Español (España))
FACTORS CONTROLLING THE DISTRIBUTION OF ORGANICALLY MODIFIED CLAYS BETWEEN POLYBUTADIENE-RICH AND POLYSTYRENE-RICH PHASES IN THE SYNTHESIS OF HIGH IMPACT POLYSTYRENE

Ivonne Gando, José Royett, Miriam Yañez, Ida Mercedes González, Helen Claret Inciarte, Haydee Margarita Oliva Bohorquez

95-109
- PDF (Español (España))
DATOS DE DIFRACCIÓN DE RAYOS-X Y REFINAMIENTO RIETVELD DE LOS SEMICONDUCTORES CALCOGENUROS TERNARIOS AgInSe2 y AgInTe2

Gerzon E. Delgado, Asiloé J. Mora, Carlos Pineda, Rosario Avila-Godoy, Solange Paredes-Dugarte

110-117
- PDF
MICROSTRUCTURAL CHARACTERIZATION OF LOW CARBON STEELS BY ATOMIC FORCE MICROSCOPY

Tiago F. A. Santos, Edwar A. Torres, José M. C. Vilela, Margareth S. Andrade, André Barros Cota

118-133
- PDF (Español (España))
WEAR AND CORROSION RESISTANCE OF DLC COATINGS DEPOSITED ON AISI 304 AND AISI 1020 STEELS

Gil Capote Rodriguez, Gil Capote Mastrapa, Jhon Olaya

134-141
- PDF (Español (España))

Instructions for the Author

Instructions for the Author

RLMM - Editorial

142-147
- PDF (Español (España))

Information about the Journal

Información del Revista

RLMM - Editorial

148-149
- PDF (Español (España))

Full Issue

Cover

Portada

Editorial Information

Información Editorial

Table of Content

Tabla de Contenidos

Editor's Letter

Editorial

Regular Articles

CHALLENGES TO THE IMPLEMENTATION OF HIGH TEMPERATURE AND STRAIN INSTRUMENTATION FOR IN SITU TESTING IN THE SCANNING ELECTRON MICROSCOPE

BIOLOGICAL AND MECHANICS CHARACTERIZATION OF MICROMETRIC AND NANOMETRIC α-ALUMINA LIKE POTENTIAL MATERIAL FOR BONE TISSUE RECONSTRUCTION

MODIFICATION OF MULTI-WALL CARBON NANOTUBES (MWNTC'S) USING ACETIC ACID AND ANILINE BY ULTRASONIC RADIATION

CRYSTAL STRUCTURE OF THE TERNARY SEMICONDUCTOR Cu2GeSe4

TOWARDS SPIDER SILK MIMICRY USING POLYURETHANES WITH SHORT SEGMENTS OF RIGID AND SEMIFLEXIBLE UNITS

EFFECT OF HEAT TREATMENT ON THE STRUCTURAL AND MAGNETIC PROPERTIES OF THE SYSTEM Fe56.25Al43.75 PREPARED BY MECHANICAL ALLOYING

RESIDUAL STRESSES GENERATED DURING HARDENING OF MEDIUM CARBON STEEL BAR, FINITE ELEMENT SIMULATION AND EXPERIMENTAL VERIFICATION

STUDY OF VENEZUELAN GARNIERITES MODIFIED WITH AMMONIUM HYDROXIDE AS SUPPORT OF HYDRODESULFURIZATION CATALYSTS

ELECTRICAL CHARACTERIZATION AND ELECTROGENIC CELL STIMULATION USING A CONDUCTIVE POLYMER COMPOSITE BASED ON PEDOT:PSS/PVA/EG

PREPARATION OF NANOCOMPOSITES METAL-POLYMER: Fe/PCL

OBTAINING SELF-COMPACTING CONCRETE USING DEMOLITION WASTE

FACTORS CONTROLLING THE DISTRIBUTION OF ORGANICALLY MODIFIED CLAYS BETWEEN POLYBUTADIENE-RICH AND POLYSTYRENE-RICH PHASES IN THE SYNTHESIS OF HIGH IMPACT POLYSTYRENE

DATOS DE DIFRACCIÓN DE RAYOS-X Y REFINAMIENTO RIETVELD DE LOS SEMICONDUCTORES CALCOGENUROS TERNARIOS AgInSe2 y AgInTe2

MICROSTRUCTURAL CHARACTERIZATION OF LOW CARBON STEELS BY ATOMIC FORCE MICROSCOPY

WEAR AND CORROSION RESISTANCE OF DLC COATINGS DEPOSITED ON AISI 304 AND AISI 1020 STEELS

Instructions for the Author

Instructions for the Author

Information about the Journal

Información del Revista

Information

Developed By

Language

Make a Submission

Browse